Work in Progress, post number 3

We had company, which required me to make cookies and homemade potato chips (cause I rock) then I actually caught a few hours sleep. I'm very close to done, if it wasn't for that pesky sleep and visits from friends (♥) I'd still probably not be done. I took a small tantrum on the bottom left section of wings. It kept irritating me and I'm still not 100% happy with it, but it's about as close as possible without taking another year ;)


↓In my tantrum(s) at the feathers not looking right, I took them out, and put them back in, about 7 times, not easy, as I had to slice under to get them off, then hope I didn't tear anything on it's way out, and hope I didn't fudge the amount under the top layer of feathers on the way back in.


↓ Proof I did actually get it all together, and looking good. this is just the wings


↓ It took a bit of doing, trying to figure out the best way to do the teeth for the cogs for the top gear, I finally went strips of evenly rolled clay, cut to the same size little squares, and stacked them so they were as even as possible without measuring too much.


↓ I ran out of the special mix and & black clay while workin on the top part, so I grabbed some chunks of scrap out of one of my three (yes three) shoeboxes full of scraps. The scraps, when I rolled them out, had some bits of canes left on them. The face you see in the right sheet is from an old 'goth girl' cane from, um, over 5 years ago, possibly 6 or 7. I'll have to find some of my old canes, I know I have a box somewere of some I've worked on over the years.. Anyways, back to the ahnk


↓ I guess you could call this the final draft. the wings are done, the cogs cut and ready to place. I just need to squish the top teeth in, smooth everything out, and give the bottom cogs some height, so they're more even with the others. I'm thinking of using one of three ideas for the background. One, a generic texture, something that isn't too buzy and won't clash with the feathers. Two, painting something to go with the clockwork ankh. Three, using some of my scrap mokume gane from an old project. It's pretty sweet, gold leaf and translucent, so it's quite the shinny. The background will all depend on what the finished piece is going to look like, and that hasn't been decided yet.
Tomorrow will be dedicated to finishing the piece, then working out how to bake it. I'm not 100% it'll fit in our oven!

Continuation of Work In Progress

So, obviously, just what the subject says, a continuation. This one with a little dialog on what I'm doing. First off, I'm using polymer clay, a mix of types. Since I covered the sketch with clay, I took one of the previous photos, snipped out the sketch, straighted it, and printed it up as a visual reference. Once I had a base layer of clay on, I sketched & cut out some gear templates, just cause it's easier to make it all match like that, then try to free hand all of them, and still make it all even.

↓base layer of clay on, checking layout with a few clay pieces & one of the paper templates


↓another layout check, this time with most of the clay bits, all laid out


↓took all the gears off, and got a thicker even layer for the wings, using wax paper to try to keep it as even as possible


↓wing segments drawn in, along with detail started on top left feathers


↓most of the top left feathers done


↓all the feathers done (except for the top two)


↓showing the detail in the feathers


↓with the gear pieces to check how it's all pulling together, make sure it's correct & all


That was all done between about 3ish am and 9am (I say 3ish, as I didn't check a clock on my way back out)

Going back out to the studio now to work on the bottom layer of feathers, then to tackle the top gear segment & see how it pulls together, then there's the thinking on what to do about the background.

A Current Work In Progress

Really, real posts coming, I've got hundred projects in progress, but this is what I've been working on today, more photos later.